19 Changing the receiving frequency
Briefly press the SET button three times.
The display now indicates the preset receiving frequency in alternation
with the channel number assigned. (If no channel number has been
assigned, three hyphens appear on the display):
With the / buttons you can now select a different frequency. The
display always jumps to the next fixed frequency setting in the program.
When you get to the desired frequency, press the SET button for about
1 second. Your entry is confirmed by the fact that Sto briefly appears
on the display.
Only now does the receiver change to the new frequency, any existing
RF link to a transmitter on the previous frequency is interrupted. The
display then switches back to the preset standard display (display of
receiving frequency or channel number)( see chapter 16).
Notes
You can discontinue the programming of this menu at any time. Press the
SET button to change to the next menu or briefly press the ON/OFF
switch to discontinue your entry. The cancellation is briefly confirmed on
the display with ESC. The display then switches back to the standard
display ( see chapter 16).
After about 15 seconds, the receiver automatically returns to normal
operation if no entry has been made during this period. Here, too, ESC
flashes briefly.
42 |